Carbon Fiber Ping Pong Blade

Keep the surface of the racket clean. Once the rubber surface is dirty, the stickiness will be greatly reduced. At this time, the positive rubber racket can be gently wiped clean with a clean cloth and clean water. The anti-rubber racket should be wiped clean with a professional sponge after each game. Be sure to avoid scratches on the rubber surface. After using the racket, use a special sponge to wipe the stains on the rubber surface. After the water is dry, apply a special table tennis anti-rubber protective film. The positive rubber must be stored after the leather surface is dry. When storing the racket, it should be placed in a ventilated and dry place, away from heat sources, avoid exposure to sunlight, and do not pile heavy objects on the racket. There are many types of rubber in table tennis tools, but they can be roughly divided into two categories, one is anti-stick rubber and the other is positive rubber. The anti-stick rubber includes anti-rubber and anti-arc rubber, and the positive rubber includes positive rubber, raw rubber and long rubber. Due to the different rubber content, the anti-rubber rubber has a larger friction, has an adsorption effect on the surface, has strong adhesion, and the contact point between the rubber and the ball is not easy to slide, which is conducive to increasing the rotation of the ball. In order to give full play to this feature, when using anti-glue, the most important thing is to keep the rubber clean. Do not wipe the rubber with oily hands. After each game, rinse the rubber with clean water and stick a plastic film on it; if there is dirt that is not easy to remove with clean water, you can also use detergents such as soap to clean it, dry it, and then use it.

The positive rubber has a low rubber content, high tooth hardness, low friction, and a small contact area between the rubber and the ball, which makes it easy to slide. Based on this feature, when using positive rubber, pay special attention to keeping the rubber dry. If you play in a humid place, you can use a desiccant to wipe the rubber to reduce the humidity on the rubber surface. The bottom skin of the positive rubber is generally thinner. When sticking it with the sponge, do not apply too much glue to the rubber at one time to prevent unnecessary loss due to the "rolling" of the rubber.